Exposed concrete can almost be compared to a piece of granite or marble transformed by staining

And many of today’s contractors are finding creative ways to take exposed aggregate to the next level. How to Prepare Floor to Stain your Concrete?Spill a little water on the surface in several locationsSpill a little water on the surface in several different locations to see if the concrete absorbs water. You must remove all possible grease stains, oils stains, paint drips or any stubborn stain blocking the entry of acid stains and must be removed. A substandard cleaning job will really show up once the sealer or wax is applied. Prepare the area, remove any stains and clean the entire floor. The concrete surface must be cleaned and washed over several times. If you are going to fix any major cracks or holes with quick dry concrete, you must allow the fixed spots to dry completely before moving along to the next steps. Don’t use acid to clean the stained concrete flooring because it will reduce the effect of the stain. It’s best to scrub with a buffing machine using strip pads and to pick up the effluent with a high-quality wet vacuum. Sanding the surface the next stepSanding the surface should be the next step after making sure that all dirt and grease is removed completely from the surface of the concrete. After the sanding is complete you will need to sweep and mop the concrete to get all the dust off of it. Anything remaining on the surface will affect stain penetration. Most stained concrete flooring manufacturers will provide color charts displaying multiple hues, or even actual samples of stained concrete to help you visualize the options.

You will be astounded by the transformation that results from the use of stains — acid or otherwise. Gather a little information on these concrete stains and let the patio rejuvenation begin. The end result is a surface that is a permanently stained and one that will withstand abuse, wear and tear without ill effects. The other choice open to you, again, is the non acid stain. With either choice, especially if you are going to do it yourself, you’ll need to know a little bit about the application process. Prior to applying the stain, give the surface a complete cleaning with a power washer or a hose and stiff brush. You just need to make sure that the surface is clear of any dirt or grime that could hinder the staining process. The main difference in this process has to do with the concrete preparation prior to staining. You’ll need to clean the concrete surface, but in addition, you’ll need to chemically treat it so as to open the pores, which will in turn permit the stain to thoroughly enter the concrete itself. Before you decide on a brand, check out all the different colors that you think will work with existing design schemes in your home or landscaping.

While the plastic or rubber outdoor grill pads may be less expensive than the others, there are a couple reasons why they do not work as well. The rubber is easy to clean, however, and easy to store when not in use. The same company offers a grill pad made of slats of recycled plastic, TREX, that is more expensive than the wood, but it does clean up better, lasts longer and is ecologically friendly. These outdoor grill pads sit over your existing deck or you can use them to cover a patch of grass where your grill will stay. You can get them with the slats very close together or spaced apart. They do suggest placing them over gravel to keep grass or weeds from growing through the slats. These outdoor grill pads are placed under the grill to protect a deck or patio from stains, sparks, barbecue sauce, marinades or other potential problems. These are not only perfect for showing team pride at home but at tailgate parties.

Comments are closed.